banner



How To Install Gps Navigation System In Car

Present,more and more owners are willing to install a GPS Navigation System in their cars.This fully shows that installing a GPS Navigation System is really necessary and convinent.But do you know how to install a GPS Navigation System for your automobile?Don't worry,this commodity will tell you in some detail.Next,we volition show youhow to install Mercedes Benz A Class W176 B Class W246 Head Unit GPS Navigation Arrangement.

Announcements:Delight cheque the appearance and the unit functions before install the unit.Don't shorten or extened the GPS antenna,it will lead to the antenna problem.Don't make the GPS antenna winding the steering wheel and shift lever,information technology will be unsafe.

Warm prompt:

one.Don't utilize potent chemicals,cleaning agents,strong detergent to washing the auto.

ii.Please utilise a clean soft fabric to wipe the screen,don't use ordinary fabric.

3.Please utilise the touch screen pen to operation unit,please don't use other sharp objects,or it will damage to the screen.

4.Please don't self-service,maintenance or install the unit,in case of the ability is on,don't install or repair the unit,it is very dangerous if the person who did not receive the electronic equipment or vehicle installation training or lack of experienced personnel to install and repair the unit.

v.Please protect the original brandish when the staff dismounting the original CD and keep the original CD,try to utilize the original screw.

half dozen.Navigation and rearview camera only to auxiliary part,information technology can't replace your attention and judgment.

seven.When the customer choose the digital Television,our unit could realized the digital TV touch.

Mercedes Benz A/B class Navigation & Audio Arrangement Installation Instruction Transmission.

Mercedes Benz A/B class Navigation System Installation Manual
Mercedes Benz A/B class Navigation Organisation Installation Manual

1.Original machine console.

Original Mercedes Benz A/B class console
Original Mercedes Benz A/B form console

2.The accessories.

The accessories
The accessories

iii.Remove the screws and take out the brandish screen.

Remove Mercedes Benz A/B class screws and take out the display screen
Remove Mercedes Benz A/B class screws and take out the display screen
Remove Mercedes Benz A/B class screws and take out the display screen
Remove Mercedes Benz A/B class screws and accept out the display screen

4.Remove the framework holder and the iii fixed screws.

Remove the framework holder and the 3 fixed screws
Remove the framework holder and the 3 fixed screws

5.Remove the Air Conditioner vent.

Remove the Air Conditioner vent
Remove the Air Conditioner vent

6.Loose the CD stock-still screws in left and right vents.

Loose the CD fixed screws in left and right vents
Loose the CD fixed screws in left and right vents

7.Pull out the left and right screws and remove the original CD,unplug the master cablevision connector.

Pull out the left and right screws and remove the original CD,unplug the main cable connector
Pull out the left and right screws and remove the original CD,unplug the main cablevision connector

8.Remove the storage box and decorative plate in the co-polit seat for wiring.

Remove the storage box and decorative plate in the co-polit seat for wiring
Remove the storage box and decorative plate in the co-polit seat for wiring

ix.Connect our power cablevision to original CD's connector,and plug our male connector to original CD.

Connect our power cable to original CD's connector,and plug our male connector to original CD
Connect our ability cable to original CD'south connector,and plug our male connector to original CD
Connect our power cable to original CD's connector,and plug our male connector to original CD
Connect our power cable to original CD'south connector,and plug our male connector to original CD

ten.Put the mini speaker to the fundamental dashbord.

Put the mini speaker to the central dashbord
Put the mini speaker to the fundamental dashbord

11.Plug the Tin BUS.

Plug the CAN BUS
Plug the CAN BUS

12.Fix the framework holder and tight the 3 fixed screws.

Fix the framework holder and tight the 3 fixed screws
Set the framework holder and tight the iii fixed screws

thirteen.Connect the GND to the original CD's shell.

Connect the GND to the original CD's shell
Connect the GND to the original CD's shell

xiv.Pull 2 original CD stock-still screws and put dorsum the original CD and then tight the screws.

Pull 2 original CD fixed screws and put back the original CD then tight the screws
Pull two original CD fixed screws and put back the original CD so tight the screws

15.Plug the all cables and prepare the head unit.

Setting sounds come out from original speakers
Setting sounds come out from original speakers

sixteen.Picture afterwards installation.

Picture after installation
Picture subsequently installation

Steps to setting up the sounds come out and interface switching.

i.Setting sounds come out from original speakers.Enter into original CD main card first,select the Sound interface by original knobs,enter into AUX interface,at present the our head unit of measurement sounds come out from original speakers.

Setting sounds come out from original speakers
Setting sounds come out from original speakers
Setting sounds come out from original speakers
Setting sounds come out from original speakers

two.Setting the navigation sound come out from mini speaker while listening original CD and Radio.While in original CD or radio interface,printing the navigation shortcut fundamental in steering cycle control to enter into navigation interface.Now the original CD and radio play continued and the navigation sound come out from mini speaker.To use this shortcut fundamental to foreground and background switching.

Setting the navigation sound come out from mini speaker while listening original CD and Radio
Setting the navigation sound come out from mini speaker while listening original CD and Radio
Setting the navigation sound come out from mini speaker while listening original CD and Radio
Setting the navigation audio come out from mini speaker while listening original CD and Radio

3.Touch the original carte to switch to our menu.

Touch the original menu to switch to our menu
Touch on the original menu to switch to our menu

4.While in our carte du jour,yous can select the original functions to enter the original organisation.

While in our menu,you can select the original functions to enter the original system
While in our card,yous can select the original functions to enter the original organization

Below is the video how to apply the GPS Navigation System for Mercedes Benz A Class W176 B Class W246:

Through the detailed description,nosotros believe that you accept mainly graspedhow to install Mercedes Benz A Class W176 B Course W246 Caput Unit GPS Navigation System.For more information,please visit:http://www.seicane.com/eight-inch-affect-screen-mercedes-benz-a-class-w176-head-unit-gps-navigation-system-with-usb-sd-ipod-canbus-aux-srd-8848   If you all the same have any problem on it,tell u.s.a. and we will be happy to offer some help for you.At the aforementioned fourth dimension,you will become a pleasant installation journey patently.Then you volition find how convinent and pefect when the GPS Navigation System comes in your automobile.At that moment,yous volition exist proud of yourself for making such wise choice.Practise you have a GPS Navigation System in your car? Why or why not?

Source: https://www.seicane.com/blog/how-to-install-mercedes-benz-a-class-w176-b-class-w246-head-unit-gps-navigation-system/

Posted by: scotttrall1987.blogspot.com

0 Response to "How To Install Gps Navigation System In Car"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel